S-Link with expander

Forums Forums SQ Forums SQ general discussions S-Link with expander

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Søren Steinmetz Søren Steinmetz 3 years, 4 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #96652
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    Came to think about two things while driving home from the church I have been helping getting their new Sq6 setup stable:

    1: If they turn on the AR2412 + AR0804 before the SQ6, they often have no sound through until they powercycle the two boxes.
    Is that normal?

    The AR2412 is the new black model, but the AR0804 in this situation is the old purple one (they have ordered a brand new black one, just waiting for it to arrive)

    2: if the AR0804 lose power, will that bring down the entire SLink chain and cut the output from the Ar2412?

    #96654
    Profile photo of Showtime
    Showtime
    Participant

    The sq has the v1.51?

    I can try this for you? I have a set of ar2412 an ar84. Never tried before.

    What is written in the io menu at the slink tab dx dsnake or nothing? If there is no audio.

    #96656
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    The SQ has 1.4

    I have no idear what it writes in the IO tab when the audio fails, and the ones running the desk in the church are all pretty green.

    I will see if my contact can ask around but I doubt anyone of them has noticed.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.