RTA's on mixpad

Forums › Forums › SQ Forums › SQ troubleshooting › RTA's on mixpad

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mike C Mike C 3 years, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2021/03/08 at 9:15 pm #99659
    Profile photo of Jim
    Jim
    Participant

    the RTA’s on mixpad will not change to different aux’s unless I go to the board and change mixes. When I change mixes on mixpad it will say the RTA is coming from the last channel I had up. This is not very handy seeing as the mixpad is mostly used to set aux’s for monitors and I don’t want to walk all the way back to the board to reset the RTA for each channel.

    2021/03/08 at 9:35 pm #99663
    Profile photo of Mike C
    Mike C
    Participant

    Set the RTA to follow the PAFL selection, then hit PAFL on the mix you want to
    look at.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.