Rta

Forums › Forums › SQ Forums › SQ general discussions › Rta

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Andre S Andre S 3 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2021/01/23 at 3:50 pm #98296
    Profile photo of Leemorr
    Leemorr
    Participant

    Hi all, is it possible to have an rta on the geq for the mains say and a separate one for a say the vocal input channel by using mixpad along side? Cheers lee

    2021/01/24 at 12:27 pm #98317
    Profile photo of Mike C
    Mike C
    Participant

    You could have the different menus open but the RTA or Spectrograph would still be fed from either the main mix or a source that is PAFL’d.
    There would still be only one RTA channel.

    2021/01/24 at 12:55 pm #98318
    Profile photo of Andre S
    Andre S
    Participant

    From the manual:
    “There are two Real Time Analysers in the SQ. One is shown in the Meters screen (the ‘Meters RTA’) and the other can be displayed in PEQ or GEQ processing screens and/or shown using Chromatic Channel Metering when in GEQ ‘Fader Flip’ mode (the ‘Channel RTA’).”

    If I interpret that correctly, you can have 2 independent RTAs.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.