Routing: Using Group sends as extra Aux's.

Forums › Forums › Qu Forums › Qu troubleshooting › Routing: Using Group sends as extra Aux's.

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of FE Rocco FE Rocco 1 year, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2022/08/02 at 4:03 pm #108290
    Profile photo of FE Rocco
    FE Rocco
    Participant

    I’m using a Qu-Pac with an expander (AR284). I need 8 mono monitor sends. I’ve used this setup and had exactly what I needed; my 2 Group sends had faders independent of the main output. All of a sudden, now my 2 Group sends (assigned to outputs on the expander) are showing me the main mix and when I make changes in the Groups, it affects the LR Mains Mix. I don’t know how anything changed from night to night but I now can only use Aux sends for monitor mixes. Any ideas?

    2022/08/02 at 6:11 pm #108292
    Profile photo of Giga
    Giga
    Participant

    Did you change the groups from “mix” to “group” by any chance ? A mix goes to a dedicated output, a group always (also) goes to mains.

    Giga

    2022/08/02 at 6:15 pm #108293
    Profile photo of FE Rocco
    FE Rocco
    Participant

    Thank you for the reply! Yes, that’s exactly what happened. Thanks for your time!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.