Routing specific channels to the Mono out

Forums Forums ME Forums ME feature suggestions Routing specific channels to the Mono out

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of KeithJ A&H KeithJ A&H 1 year ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #111996
    Profile photo of Soundklaus
    Soundklaus
    Participant

    Routing specific channels to the Mono out of the ME-1.

    We know that the MONO out of the ME-1 is the sum of the L-R Mix of the ME-1.

    It would be nice, if you could route single channels, for example just the Kick drum mic, out of the Mono out to send it to a drum sub or drum throne. Should be better than sending the whole mix to the sub or throne.

    #111997
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    @Soundklaus

    It’s a nice suggestion, but I’m afraid not possible.
    The mono out is an analogue sum of the ME’s LR mix, meaning there is no way to separately assign anything digitally and not something that could be changed with a firmware update.

    On SQ/Avantis/dLive however, you can route any direct output to any output socket, which would not use up a mix and give you what you need here.

    Thanks,
    Keith.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.