Routing info on channel display

Forums › Forums › Avantis Forums › Avantis feature suggestions › Routing info on channel display

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Yoely Yoely 5 months, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2022/07/14 at 8:38 am #108004
    Profile photo of Si5Bellies
    Si5Bellies
    Participant

    The adding of routing information on the individual channels. We use groups to zone off our stage sound from FOH mix. Allowing the stage to sound check instruments and monitors while not affecting FOH.

    Adding routing info on the channels will allow users to see which input channels are going directly to L/R bus or to a group bus.

    2022/07/28 at 12:54 pm #108220
    Profile photo of Tatsuya Nakamura
    Tatsuya Nakamura
    Participant

    +1 ‼︎

    2023/10/26 at 7:52 pm #116059
    Profile photo of Yoely
    Yoely
    Participant

    +1
    to be able to toggle and see the assigned socket

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.