Routing 2 channels to 1 USB track

Forums Forums SQ Forums SQ general discussions Routing 2 channels to 1 USB track

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of Tobi Tobi 10 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #113119
    Profile photo of tutu13
    tutu13
    Participant

    Hi everybody,

    I sound a group on 33 channels:

    1-24 from an AR24-12
    25-33 from SQ-5 (XLR 1-9)

    The electric guitar is wired to XLR 11 of the AR2412 (Ip11)

    On one song the guitarist changes his guitar,
    he takes an acoustic guitar wired to the XLR 9 (48V) of the SQ-5 (Ip33)
    On this song, I mute the Ip11 and unmute the Ip33.

    I’d like to route the Ip33 in advance to track 11 of my USB key
    to have the acoustic guitar on the recording,

    but in the I/O menu can we route several channels to one USB track ?

    #113120
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    Nope, 1 track = 1 IP

    A workaround, if you have it available, could be to route both guitars to an unused Group, Unassign the group from your mix and patch the group as that one track on the recording.
    Disclaimer: not tested as I use my Dante to record straight into reaper/Nuendo/Waves Tracks Live. 😉

    #113121
    Profile photo of tutu13
    tutu13
    Participant

    Thank you Søren ,
    unfortunately I no longer have a group available 🙁

    #113123
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    So you use all Aux and all groups….

    Hmmmm wild idear: if you have one of the FX sends unused, then send the two channels to that, make it a PEQ and bypass it, then record the return from that FX ?

    Other than that I am out of solutions.

    #113124
    Profile photo of tutu13
    tutu13
    Participant

    .. interesting, we can send to an FX … PRE signal?

    #113139
    Profile photo of Tobi
    Tobi
    Participant

    Mmh… Maybe Grab your SQ or Mixpad and have a Look at the Routing Page?

    Best Regards,
    Tobias

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.