Room Mic to Post Aux, but not LR

Forums Forums SQ Forums SQ general discussions Room Mic to Post Aux, but not LR

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Adam Adam 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #117510
    Profile photo of Adam
    Adam
    Participant

    Hello everyone. Newbie to digital boards here so this may be an easy question.

    On our current ZED 436, we have our room mics going through the Post Auxes, but not through the MLR outputs simply using the “routing buttons” next to each fader”.

    On an SQ, is there a way to do the same thing of sending a channel to a Post Aux, but not through LR?

    Thank you!

    #117511
    Profile photo of mfusa
    mfusa
    Participant

    Yes, you can run entirely separate aux mixes that do not have to go to main LR output.

    #117517
    Profile photo of Don
    Don
    Participant

    We do exactly what you are asking: we have a stereo pair of room mics and piano mics that are routed to our livestream, but not to the main L/R FoH mix. Page 42 in the SQ Reference Manual explains how. See attached image.

    In the example in the manual, ip1 (Input 1) is the selected channel and you can see all of the potential outputs for it. Notice MainLR is the first option and it is currently ON; tap the ON button and you will un-route Input 1 to MainLR.

    Hope that helps,
    -don

    Attachments:
    You must be logged in to view attached files.
    #117528
    Profile photo of Adam
    Adam
    Participant

    I knew I had to be missing something simple. Thank you!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.