R/L RCA Inputs – Sum to mono?

Forums Forums GLD Forums GLD general discussions R/L RCA Inputs – Sum to mono?

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of jcarter jcarter 7 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #55741
    Profile photo of Reelzman1
    Reelzman1
    Participant

    GLD-80 – We have a mono FOH system and are having a problem with a need to sum the R/L RCA input so it gets sent to the house without the stereo imaging (as panned audio gets lost). Scratching our heads with this and cannot come up with a solution…yet. Any help or suggestions would be appreciated!

    #55742
    Profile photo of Eelke
    Eelke
    Participant

    How about routing the RCA inputs to a mono group first? It will get summed in the group.

    #55749
    Profile photo of jcarter
    jcarter
    Participant

    If you’re not tight on mixes, you may want to think about configuring the mains as LR + Msum and using the Msum as your PA feed, so that panning a mono input won’t change its level in the PA. The nice thing about that approach is that your stereo inputs will automatically sum to mono as well.

    If you’re not tight on inputs, you could keep whatever bus configuration you run now and assign two mono input processing channels to your R/L RCA pair.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.