Reverb to monitor mix help

Forums › Forums › Qu Forums › Qu troubleshooting › Reverb to monitor mix help

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mfk0815 Mfk0815 1 year, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2022/04/22 at 1:19 pm #106920
    Profile photo of dove
    dove
    Participant

    Hi, can anyone tell me how to apply reverb to FOH then add the same rev to monitor mix but with the ability to set a different level of rev in the monitors than the FOH.

    basically need to have vocal rev levels different in FOH and Stage Monitors?

    thanks

    2022/04/22 at 7:54 pm #106922
    Profile photo of Mfk0815
    Mfk0815
    Participant

    Fir each FX exists a dedicated FX Return channel which can be used for Main and Monitor mixes in the exact same way as all input channels. There is no difference, except that the signal comes from the FX engine instead of an input socket.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.