Topic: Recording onto GarageBand on iPadPro | Allen & Heath Digital Community

Recording onto GarageBand on iPadPro

This topic contains 4 replies, has 2 voices, and was last updated by Malinky 4 years ago.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
2020/04/14 at 10:36 am #90986

Malinky
Participant

Hi there, I’m a total newbie and doing some recordings onto my iPad Pro model: MTXN2X/A software version: 13.1.3. I have a ZED SIXTY-14FX and have the lead which goes from the mixer (with a USB end).. I need the correct USB to iPad lead but not sure which is the right one. Please can someone advise? Many thanks!

2020/04/14 at 11:12 pm #91016

Anonymous

Which Allen and Heath Mixer are you using?

2020/04/15 at 6:17 am #91021

Malinky
Participant

Using the ZED SIXTY-14FX..

2020/04/15 at 6:52 am #91022

Anonymous

Unfortunately you are in the incorrect forum.
And there is NO FORUM [here with-in Allen Heath] for the Zed series mixers.
And I dont know quite why that is!
as all people that use Zed series mixers are potential digital relatives !?

However with an iPad you need a camera adaptor
and you need a USB lead like a printer uses . USB A [square shape] to the camera adaptor.
USB B or in the later units USB3 NOT USB C

Maybe you could check out Gearslutz forum?
Hope this helps.
regards

2020/04/15 at 8:43 am #91026

Malinky
Participant

Yeh – I wondered which forum I should ask in! I have this lead which goes into the mixer – the square shape to a USB. So I’ll look into the USB B or USB3 and maybe post a question on the Gearslutz forum. It’s a late model iPad Pro which I only got 6 months or so ago and only has one small port (the charger port) with no headphone in port. Thanks for your help!

Attachments:
You must be logged in to view attached files.
Author

Posts