Ran Out Of Pk Layers On Avantis Solo

Forums Forums Avantis Forums Avantis General Discussions Ran Out Of Pk Layers On Avantis Solo

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #122761
    Profile photo of MattMatt
    Participant

    Hi everyone,

    I use the avantis solo and quickly run out of layers, A-E are mostly full sometimes. I’ve read online that there is a way to extend the amount of layers by creating a scene and recalling it with a soft button. I’m confused on how to build the scene, that wouldn’t affect the live mix and preserve the everchanging adjustments (not being overriden). I’m sure it’s something to do with filters, but I don’t understand what to keep active and what exactly to recall. The scene recall with a soft button seems to be the easy part.

    Anyone do this before and is this the best way to get more layers on the solo?

    Thank you!

    #122775
    Profile photo of SteffenRSteffenR
    Participant

    You need to block all parameters from recall except the layer assignment.

    #122776
    Profile photo of SteffenRSteffenR
    Participant

    Like this!

    Attachments:
    You must be logged in to view attached files.
    #122781
    Profile photo of MattMatt
    Participant

    You the best SteffenR! Trying it out tonight!

    #122788
    Profile photo of Flo84Flo84
    Participant

    In addition to this solution, you can also use the DCA and the DCA spill function.
    It’s not obligatory to place the channels on a layer to put them in a DCA (using the menu, you can directly assign the channels you want).
    By placing the DCA on a layer, when the Spill function is activated, press the “mix” button and the channels contained in it will be displayed (on several layers if necessary).

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.