Qu32 and Pro Tools

Forums › Forums › Qu Forums › Qu troubleshooting › Qu32 and Pro Tools

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 8 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2015/08/08 at 12:09 pm #49721
    Profile photo of David
    David
    Participant

    Qu32 running ver1.7 with PT12
    Have been trying to get the DAW and recording working, have got a connection of sorts if any fader on board is moved it always shows as fader for ch 7 on software.
    Also have found following
    ch17 is soloed on the software it triggers soft key 1
    ch18 is soloed on the software it triggers soft key 2
    ch19 is soloed on the software it triggers soft key 3
    ch20 is soloed on the software it triggers soft key 4
    No other functions seem to operate and need to figure it out as have a show soon where we need to record all 32 channels.

    2015/08/08 at 1:21 pm #49722
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Recording and control are quite different – which is important, focus on that.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.