QU24 as audio interface channel limit

Forums › Forums › Qu Forums › Qu troubleshooting › QU24 as audio interface channel limit

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of geesbert geesbert 1 year, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2023/02/03 at 8:03 am #111281
    Profile photo of geesbert
    geesbert
    Participant

    I use my QU24 as a soundcard with either Ableton and my ipad. I manage to use channels 1-16 successfully, but I can only get the first 16 channels into my DAW. The channels 17-24 show signal on the mixer, but don’t feed into my DAW, although they are recognized as input channel, they stay silent. I checked all the routing options in the 17+ channels, they seem to be aligned with the 1-16 channels. Both my Macbook and my ipad are top spec. Might there be a setting which I have missed?

    2023/02/03 at 1:50 pm #111285
    Profile photo of Mike C
    Mike C
    Participant

    What menu did you check the routing in?

    In the set up screen IO patch USB Audio is where the channels are assigned to the USB tracks.
    You probably want to use the direct out option.
    The global channel direct out settings are located in any of the input channels routing menu.
    Maybe start with follow fader follow mute turned off and post preamp.

    2023/02/06 at 9:33 am #111345
    Profile photo of geesbert
    geesbert
    Participant

    Mike, Thanks a lot, that was the problem, it was all scrambled up after channel 17….

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.