Qu-SB New User Basic Questions

Forums Forums Qu Forums Qu general discussions Qu-SB New User Basic Questions

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of NotJohnny NotJohnny 1 year ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #113125
    Profile photo of NotJohnny
    NotJohnny
    Participant

    Hello Everyone,

    I sing in a band and I also run our sound (sometimes), and I am a relatively new and inexperienced user of the Qu-SB Digital Mixer. I am hoping to ask occasional questions, and get occasional answers! So here goes…

    When I am changing a monitor mix for one of our musicians, the main output changes. So for example if I add gain to the bass for the bass player to hear, the main mix bass gain increases also. I am likely doing something wrong, so this may be a simple answer. Another example is… if the same bass player wants more of the lead vocals in his (in-ear) monitor, when I adjust for his mix, the house lead vocal volume changes as well. Is there a simple way to change the individual monitor mix, while NOT changing the house mix? Thank you!

    #113127
    Profile photo of Giga
    Giga
    Participant

    Do you come from an analog console ?

    Giga

    #113128
    Profile photo of NotJohnny
    NotJohnny
    Participant

    No I have only used the QU-SB

    #113130
    Profile photo of Mike C
    Mike C
    Participant

    It sounds like you adjusting the channel input gains.

    On the QU Pad APP you need to select from the mixes located on the
    lower right hand side of the iPad screen, when you do that the faders
    become the the mix send levels, like the aux knob on an analog mixer.
    Remember to switch back to the main LR mix.

    You’ll want the monitor mixes to be set for PRE FADE and generally set for
    PRE EQ.

    #113132
    Profile photo of Giga
    Giga
    Participant
    #113151
    Profile photo of NotJohnny
    NotJohnny
    Participant

    Thank you!!!

    Is there a particular way to set the monitors to pre-fade?

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.