qu-pad: please improve fader level input

[azeyParticipant]

Just did a first gig with the qu-pac last night.
Sounded great, but I found it difficult to adjust levels reliably from the iPad.
The space allocated for the fader is on the small side and small movements of the virtual fader strip register as significant volume changes.

– please include digital read-out of the fader level at all times (not only when the fader is being touched).
– please include an option to enter the fader level with the keyboard.
– please consider the ability to expand the faders to full screen height so there is more spacial resolution.
– please display the previous level while the fader is being adjusted
– please consider +/- notch buttons (e.g. +3db and -3db or some small increments) on faders
– please consider “virtual tape marks” one or two (or three) marks one could quickly go to.

Thanks!

[Dick ReesParticipant]

Most of the functionality you desire is already available…IF you practice using the app. The primary technique you need to utilize is to touch the desired fader strip, leave your finger on the surface and then move your finger to the side. Fader increment/speed will be less/slower the farther your contact point is from the selected strip.

This gives you the first of the things you requested and also increases/enhances visibility.

Practice up.

[azeyParticipant]

Thanks! Haven’t seen this technique in the documentation… will definitely help.

[Author]

Posts