Qu-Pad ON Buttons

Forums › Forums › Qu Forums › Qu general discussions › Qu-Pad ON Buttons

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of xpilotcz xpilotcz 10 years, 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2014/02/28 at 7:16 pm #37974
    Profile photo of xpilotcz
    xpilotcz
    Participant

    Hi everyone,

    I have question regarding the QU-Pad app. I cannot find what are “ON” buttons located next to each fader for. If I turn a channel off then signal still goes to the effect units so it is different from MUTE buttons. Also, where I can find buttons which correspond to these ON QU-Pad Buttons?

    Thanks for your answers,
    Pavel

    2014/02/28 at 8:44 pm #37977
    Profile photo of mervaka
    mervaka
    Participant

    Sounds like you’re talking about the channel assigns. Hold down the assign button to the left of the SEL keys. This should show you the assigned routing for the currently visible mix. Also viewable on a per-channel basis from the routing screens.

    2014/03/02 at 6:51 pm #37983
    Profile photo of xpilotcz
    xpilotcz
    Participant

    Mervaka,
    I checked that yesterday evening and you are right.
    Thanks for your help.
    Pavel

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.