QU Pad Not controlling faders

Forums › Forums › Qu Forums › Qu troubleshooting › QU Pad Not controlling faders

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 6 years, 3 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2018/01/07 at 7:14 pm #67996
    Profile photo of Kyle.macintire
    Kyle.macintire
    Participant

    I had control of everything under Admin a few hours ago but lost control of just the channel faders, nothing else. Anyone had this problem?

    2018/01/07 at 9:33 pm #68001
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Are you mixing the mix you think you are mixing? On the pad? On the desk?

    2018/01/10 at 3:45 pm #68069
    Profile photo of Alex
    Alex
    Participant

    Hello all

    Need some help. Yesterday I connected my qu 16 to my qu pad the problem is that I can only control the LR function through the pad. When I try to change to FX1 or a mix from the pad it does not work I have to go back to board press the mix button then I am able to control it. Is this normal function? I did notice that I have version 1.91 on the pad and 1.90 on the board would this be the problem?

    2018/01/10 at 4:34 pm #68072
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Are you sure its not working as I suggested in your other thread?

    2018/01/12 at 7:55 am #68126
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Alex – does it ‘not work’ or does it work just fine, but not change the layer selected on the desk?

    The desk and QuPad are independent control surfaces

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.