QU-Pad connect

Forums Forums Qu Forums Qu general discussions QU-Pad connect

Tagged: , ,

This topic contains 21 replies, has 5 voices, and was last updated by Profile photo of Bear Bear 6 years, 7 months ago.

Viewing 7 posts - 16 through 22 (of 22 total)
  • Author
    Posts
  • #64780
    Profile photo of Whatfloor
    Whatfloor
    Participant

    Pic

    #64788
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Then you need to check all the connections.

    Is there a link light on the LAN (not WAN) port of the router. Is there a link light on the network (not dSnake) port of the QU.

    Is the QU set to DHCP?

    #64789
    Profile photo of Whatfloor
    Whatfloor
    Participant

    Yes

    #64814
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Yes to what?

    #64815
    Profile photo of Whatfloor
    Whatfloor
    Participant

    “Then you need to check all the connections.

    Is there a link light on the LAN (not WAN) port of the router. Is there a link light on the network (not dSnake) port of the QU.

    Is the QU set to DHCP?”-

    Yes to all

    #64823
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    And I presume that the wap/router is a dhcp server…

    The QU should therefore have an address displayed on the settings screen.

    The iDevices should also have an IP address shown in their network config

    #64852
    Profile photo of Bear
    Bear
    Participant

    did you try a static IP on the board ?

Viewing 7 posts - 16 through 22 (of 22 total)

You must be logged in to reply to this topic.