Qu-Pad app mute indicators.

Forums Forums Qu Forums Qu feature suggestions Qu-Pad app mute indicators.

This topic contains 8 replies, has 3 voices, and was last updated by Profile photo of garyh garyh 3 months ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #92962
    Profile photo of garyh
    garyh
    Participant

    I would like to see the mute buttons indicate when channels are muted by mute groups like the board does. It doesn’t have to be blinking like the board, but some 4 mode indication: off, on, on+mute group, off+mute group.

    #92967
    Profile photo of SteffenR
    SteffenR
    Participant

    there is a Mute Group indicator already present…

    #92972
    Profile photo of garyh
    garyh
    Participant

    But the mute button on the channel strips don’t indicate if a mute group is active on the channel. A channel strip unmuted doesn’t show if it’s been muted by a mute group, it simply shows it as unmuted.

    #92973
    Profile photo of volounteer
    volounteer
    Participant

    @garyh

    I thought our channel strip lights blinked to show they were muted elsewhere.

    #92975
    Profile photo of SteffenR
    SteffenR
    Participant

    @williamadams
    QuPad app

    @garyh
    the channel strips have small indicators it they are muted via Mute Group

    #92979
    Profile photo of volounteer
    volounteer
    Participant

    @mikec

    Thanks.

    I was referring to the board. The ipad ap may do it differently.

    Will have to check to see how they are actually muted for us.
    Thought it would be a group as we use a softbutton to toggle them.

    #92983
    Profile photo of garyh
    garyh
    Participant

    Thanks Steffens. I’ll look for it next time I use the app.

    #92985
    Profile photo of SteffenR
    SteffenR
    Participant

    I was referring to the board. The ipad ap may do it differently.

    we talked about the APP and nothing else
    like the title of the topic suggests

    Thanks Steffens. I’ll look for it next time I use the app.

    it’s beside the 5dB mark on the fader strip
    and it’s only visible if the strip is part of a MUTE group

    the same applies to the DCA’s and it is working in offline mode as well

    #92999
    Profile photo of garyh
    garyh
    Participant

    Steffens, I just checked this out in the app’s demo mode. I see them. I still think the mute button itself should somehow indicate when it’s muted by a mute group. The little square just doesn’t get your attention like the bigger mute button does. Why can’t they blink like the board’s mutes do?

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.