QU-PAC TalkBack improvments

Forums › Forums › Qu Forums › Qu feature suggestions › QU-PAC TalkBack improvments

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Giga Giga 7 years, 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2016/10/27 at 5:14 pm #58913
    Profile photo of DanZ
    DanZ
    Participant

    Hello,

    I have ideas for the talkback input.

    1) Is it possible to adjust the volume of the talkback for each aux out?
    Musicians with IEM like to decide the volume of the talkback mic. Not only ON/OFF

    2) My dream is to be able to use a soft button (midi controllable) to select another INPUT to be the talkback input
    This would be a very handy feature for my band, as the singer can press a switch and be able to talk to other band member with his own microphone. then, me, the keyboard player, can press a button and answer to other members.
    Releasing the button will put back the microphone for the front main speakers 🙂

    2016/10/28 at 9:42 am #58927
    Profile photo of SteffenR
    SteffenR
    Participant

    to 1: use a channel
    to 2: programm scenes with this task in mind

    2016/10/28 at 3:10 pm #58929
    Profile photo of Giga
    Giga
    Participant

    DCA over the main fader ? That way all your monitors stay alive but FOH is silent…

    Giga

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.