QU-PAC backup

Forums Forums Qu Forums Qu general discussions QU-PAC backup

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Mike C Mike C 1 year, 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #88144
    Profile photo of xiim
    xiim
    Participant

    Hi!
    I need to send my qu-pac to warranty repair.
    I want to backup my settings (matrixes etc).
    Is it enough if I just copy my scenes to USB stick?
    thanks!

    #88147
    Profile photo of Mike C
    Mike C
    Participant

    That will do it.

    What firmware version are you running on your QU Pac?

    I did have a couple scenes that were created on an earlier
    firmware version, worked fine being recalled in the mixer during
    the various update versions but for reason would not load back into
    a mixer.

    All of other newer scenes loaded and copied fine.

    #88148
    Profile photo of volounteer
    volounteer
    Participant

    I would copy the show rather than scenes if the qu-pac has that option.
    The documentation is unclear as to what would save everything so you could restore it.

    #88150
    Profile photo of Mike C
    Mike C
    Participant

    Shows are saved directly to the USB stick, scenes are part of the show.
    When recalling a scene and you want every setting that was set up in the mixer
    to be recalled with the scene be sure the scene filters are off and the scene recall
    blocks are all off.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.