QU PAC – Assigning channels to Group & Mix

Forums Forums Qu Forums Qu general discussions QU PAC – Assigning channels to Group & Mix

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Ben Ben 1 year, 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #108168
    Profile photo of Ben
    Ben
    Participant

    Hi, I’m new to this forum and recently got the Qu Pac for my church. It is not obvious from the manuals on how to assign channels to Group or Mix. Can someone point me to any specific instructions or tutorials?

    #108302
    Profile photo of shufflebeat
    shufflebeat
    Participant

    If you look at the top of the fader there’s a button marked “on”. If this button is lit then your channel is assigned to whatever mix you have selected at the time.

    If a particular channel is “off” for the L/R mix but “on” for a group and that group is “on” for the L/R mix then that channel will be routed through the group to L/R.

    Etc., etc.

    Is that any help?

    #108388
    Profile photo of Ben
    Ben
    Participant

    Thanks so much shufflebeat, it works!!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.