QU-pac and expander-handling USB audio in

Forums Forums Qu Forums Qu general discussions QU-pac and expander-handling USB audio in

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of MarkPAman MarkPAman 4 years, 5 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #61834
    Profile photo of Mbirame
    Mbirame
    Participant

    Hi folks,
    I found most of the answers to my QU-pac in the manual. I have a couple questions I need clarifying. Are you able to send all 8 of the group channels out to the audio racks? Page 72 in the manual say that 1-4 are the default setting, but I want to be sure you can choose the other group outputs as well, right?

    Are you able to duplicate outputs-like have outputs 1-4 on the audio rack both be a copy of the L-R output?

    #61846
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    You can certainly duplicate outputs.
    Are there 8 groups, or are the 4 groups stereo and therefore sent as L&R pairs? (I have the QU16, so groups are outside my experience on this desk)

    #61850
    Profile photo of MarkPAman
    MarkPAman
    Participant

    There are 8 individual outputs from the groups.
    Stereo mixes, matrix, and even L and R are also individually patchable.

    #61855
    Profile photo of MarkPAman
    MarkPAman
    Participant

    You can check this on the app.

    Random settings!

    #61856
    Profile photo of MarkPAman
    MarkPAman
    Participant

    OK – Try again…

    Hmmm bit to small now, but you’ll get the idea!

    Attachments:
    You must be logged in to view attached files.
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.