Qu manual

Forums Forums Qu Forums Qu general discussions Qu manual

This topic contains 7 replies, has 7 voices, and was last updated by Profile photo of Dr. J Dr. J 7 years, 10 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #56046
    Profile photo of Penman53
    Penman53
    Participant

    Just curious if the Qu user manual is updated following a system revision, i.e 1.9. Is there anything in there making it desirable to download and print again?

    #56053
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Download it, but I never print them…

    I’ve got the block diagram printed, so if that changes I’ll print it again…

    #56058
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi All,

    The block diagram hasn’t changed since V1.8 as there hasn’t been any significant change in DSP or routing.
    The Getting Started Guides and Reference Guide have been updated mainly to include reference to V1.9, Qu-SB and Qu-Control. It’s a good idea to download them and have them at hand.

    #56059
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Assuming you use an iPad, then iBooks is the perfect place to store them.

    #56060
    Profile photo of
    Anonymous

    ibooks huh? good idea! 😐

    #56061
    Profile photo of Gordon
    Gordon
    Participant

    Here is your link to the updated user guide.

    Qu-Mixer-Manual-1.9

    #56066
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    The block diagram hasn’t changed since V1.8 as there hasn’t been any significant change in DSP or routing.

    Glances up at wall…

    I’ll print it from 1.9 then (1.5 still on my wall at the moment (oops)

    #56078
    Profile photo of Dr. J
    Dr. J
    Participant

    I believe the manual is easily asscessible from the Qu app program as well while it is open.

    Setup > Help

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.