Qu-drive on Qu-Pac, no audio

Forums › Forums › Qu Forums › Qu troubleshooting › Qu-drive on Qu-Pac, no audio

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Mike C Mike C 12 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2023/04/23 at 8:44 pm #112562
    Profile photo of hobsound
    hobsound
    Participant

    Strange issue, wondering if anyone else has seen this.
    Formatted a USB Flash drive in my Qu-Pac, put 10 or so WAV files on it for audio playback.
    The Qu-Pac sees the drive, sees the track names, lets me select a track, hit play, the track shows it is playing.
    But I am not getting any audio out on ST3.
    Took the same flash drive, put it into my Qu-SB, plays back fine. I can hear the audio.
    Have tried numerous flash drives, same issue. Fine in the Qu-SB but no audio out of the Qu-Pac.
    Any ideas?
    Thanks!

    2023/04/24 at 3:14 am #112565
    Profile photo of Mike C
    Mike C
    Participant

    Double check on the QU Pac that you have the ST3 source set to be the USB QU Drive
    and not the local input jack on the front.

    2023/04/24 at 11:22 am #112568
    Profile photo of hobsound
    hobsound
    Participant

    Hey Mike C, you were absolutely correct!
    Not sure why I never checked the source. It was set to Local from the last time I had to use laptop music for a ceremony.
    Thanks for the suggestion-

    2023/04/25 at 12:40 am #112586
    Profile photo of Mike C
    Mike C
    Participant

    Good to hear it was an easy fix!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.