Qu-App "Pre" button

Forums Forums Qu Forums Qu general discussions Qu-App "Pre" button

This topic contains 9 replies, has 5 voices, and was last updated by Profile photo of gravyface gravyface 4 years, 6 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #86166
    Profile photo of gravyface
    gravyface
    Participant

    Feel silly here, but what’s the equivalent on the mixer itself? I honestly can’t find anything under Processing for each channel.

    #86167
    Profile photo of DoctorG
    DoctorG
    Participant

    The Processing information screen reflects the channel where the Select button is pressed or lit.

    Did I understand your question?

    #86168
    Profile photo of SteffenR
    SteffenR
    Participant

    on the left side is a button called “pre”
    if you press a mix button on the right, you can set pre/post with these button
    the assign button does similar things for aux on/off and assign to the main mix on/off

    a reference is “Getting Started Guide” Page 11

    #86172
    Profile photo of gravyface
    gravyface
    Participant

    Thanks guys.

    Trying to setup personalized mixes for everyone (4 of us) using the stereo Mix busses and the Groups. Working well, but pre/post toggling really boosts the perceived volume in the mixes. Thinking probably post-fader is more manageable while we’re tracking (no PA, just cans), but seems like “pre” is being used to bump up the can mix for some of them.

    #86175
    Profile photo of SteffenR
    SteffenR
    Participant

    pre is used when you need your mixes independent from the main mix

    #86184
    Profile photo of gravyface
    gravyface
    Participant

    I don’t plan on using the main mix at all (Qu-24 is only used in a studio setting for tracking and headphone mixes). But will pre allow muting of channels on say Mix 5/6 that won’t affect Mix 6/7?

    #86194
    Profile photo of Giga
    Giga
    Participant

    Yes, simply unassign them from said mix.

    Good luck !

    Giga

    #86202
    Profile photo of gravyface
    gravyface
    Participant

    I tried that, but the mute seemed to be global.

    #86203
    Profile photo of garyh
    garyh
    Participant

    Mutes are global to all mixes. As Giga notes, if you want channels muted in certain mixes, you will instead have to unassign them from those mixes.

    #86219
    Profile photo of gravyface
    gravyface
    Participant

    ah, ok. Thanks everyone.

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.