Qu-32 using dSnake as well as back panel

Forums › Forums › Qu Forums › Qu general discussions › Qu-32 using dSnake as well as back panel

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2019/09/25 at 2:00 pm #86645
    Profile photo of psikespsikes
    Participant

    I see in the manual that the outputs on the Qu are still available while the dSnake is connected but I am wondering if using the L/R outputs on the mixer with an AR2412 connected causes any signal degradation or are there other reasons to not do both. One of our musicians wants to hear the mains with his IEM. Thanks for any thoughts.

    Phil

    2019/09/25 at 2:12 pm #86646
    Profile photo of garyhgaryh
    Participant

    No degradation. Everything is digital up to the point of output.

    2019/09/25 at 3:11 pm #86647
    Profile photo of psikespsikes
    Participant

    Thanks, that was what I thought but just wanted to be sure.

    Phil

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.