QU 24 to AR2412 Expander

Forums › Forums › Qu Forums › Qu general discussions › QU 24 to AR2412 Expander

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2024/09/04 at 5:34 pm #125291
    Profile photo of TogieTogie
    Participant

    Has anyone used the AR2412 Expander with a QU Board? Im setting up a church and wondering if you can dedicate 2 of the outs on the AR2412 to be the Mains L/R for the QU24 board? So that you only need to run CAT5 cable from the board to the stage where the inputs will be… (or do you need to run XLR Mains from the board to the stage in addition to the CAT5?..). Hopefully this makes sense… thanks.

    2024/09/04 at 6:15 pm #125296
    Profile photo of BrianBrian
    Participant

    You can assign any of the busses to any of the outputs. It doesn’t matter if the outputs are physically located on the console itself or on a connected stage box. So yes, if you want to send the Main L/R output to some of the stage box’s analog outputs, that is no problem and very easy to do.

    2024/09/04 at 6:54 pm #125299
    Profile photo of TogieTogie
    Participant

    I figured and hoped that was the case. Thx!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.