Qu 24 Pan control in Logic pro X

Forums Forums Qu Forums Qu DAW integration Qu 24 Pan control in Logic pro X

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of Tom Tom 4 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #63239
    Profile photo of Tom
    Tom
    Participant

    Hi, i try to set my qu 24 for control Logic pro x. My problem is when i try to use pan Rotary to control the pan channle strip in logic.

    When i map the pan on mixer send to logic a value cc from 0 to 74… and not from 0 to 127. if i set an other rotary like a eq the problem not appear…

    I see that the firt whidt eq rotary and the last send cc value from 5 to 127. all frq or gain from 0 to 127 like hpf/pre/comp/gate.

    Is my mixer whit problem or is normal? i try with 2 mac but same result.

    Thanks,
    Thomas Cozzani

    #63240
    Profile photo of Tom
    Tom
    Participant

    I try with my qu 32 too. The result us the same

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.