QU-16 USB Cable and Audacity

Forums › Forums › Qu Forums › Qu general discussions › QU-16 USB Cable and Audacity

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of BRBC BRBC 5 years, 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2019/02/24 at 12:45 pm #82207
    Profile photo of BRBC
    BRBC
    Participant

    Hi,

    I’m new to the QU-16 and we are trying to set it up to record on a laptop. I’ve got a USB Cable from the port on the QU-16 and have setup the drivers on the laptop (including Qu Control Panel). I can confirm that Windows gets the output from the QU-16 as when you go to Sound Settings and choose Line (Qu-16) as the Input Device then when doing ‘Test your microphone’ the levels change when the sound desk is tested. However, I can’t get Audacity to do any thing, with input set to MME/Line (QU-16) I get absolutely nothing. I’ve tried all sorts of FAQs etc but haven’t found any settings that work.

    I could, of course, record via the USB Drive but I wanted to test this approach first 🙂

    Any help appreciated.

    Thanks
    Phillip

    2019/02/24 at 1:28 pm #82208
    Profile photo of SteffenR
    SteffenR
    Participant

    what are you sending to the computer?

    2019/02/24 at 4:47 pm #82217
    Profile photo of Dick Rees
    Dick Rees
    Participant

    . I’ve got a USB Cable from the port on the QU-16

    The USB-b port or the Qu-drive?

    2019/02/28 at 9:52 am #82286
    Profile photo of BRBC
    BRBC
    Participant

    Sorry for delay in replying! It’s coming from the USB b-port at the back of the QU-16.

    Thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.