QU-16 Midi With Octopus

Forums Forums Qu Forums Qu general discussions QU-16 Midi With Octopus

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Alex A&H Alex A&H 4 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #84408
    Profile photo of adcs
    adcs
    Participant

    Hi, ok, so I’m trying to mute/unmute channels remotely from octopus, this is a software that gives you control over many devices, this software already recognizes the TCP MIDI Driver and it is communicating with the QU-16, but the values that I have to input in the software doesn’t really makes sense to me, and I dont know what to input here, so this are my options:

    So thanks in advance for all the help you can bring me

    Attachments:
    You must be logged in to view attached files.
    #84419
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi Adcs,

    The Qu uses a Note On, followed by a Note Off message for mute control, so you would need to send two separate messages per mute control.

    CH 1 mute on – 90 20 7f 80 20 00

    CH 20 mute off – 90 33 3F 80 33 00

    You can find more information on this here: https://www.allen-heath.com/media/Qu_MIDI_Protocol_V1.9.pdf

    Alternatively, you could also use V1.7 of the DAW Control driver which allows mute control with one Note message via the CC translator map.

    CH 1 mute on – 90 00 7F

    CH 20 mute off – 80 13 3F

    There’s more information on that here: https://www.allen-heath.com/media/DAW-Control-Help-V1.7.pdf

    Thanks!

    Alex

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.