Qu 16 FX Send, Return & Reverb for Place of Worship

Forums Forums Qu Forums Qu general discussions Qu 16 FX Send, Return & Reverb for Place of Worship

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mike C Mike C 3 weeks, 6 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #106982
    Profile photo of ElPatron
    ElPatron
    Participant

    Hi All

    We have setup the QU-16 for our place of worship and have used EMT250 for FX1 and Hall480 for FX2

    The reverb is clear but doesn’t seem to feel like the end product we were looking for.

    The following is a link of the kind of sound we require (around 58:30 minutes in): https://youtu.be/zituQubofVY

    Are we using the correct FX?
    If so, then do I need to tweak pre delay, decay time or something else?
    If not, Which from the FX library would you suggest we use and tweak?

    Many Thanks

    Regards

    Hakeem

    #106983
    Profile photo of Mike C
    Mike C
    Participant

    I would try some of the room reverb choices and roll some of top end off
    on the return channel.

    In the video it sounded like there was a room mic mixed into the audio
    feed for the live stream, that would have been a source in itself of the
    reverb.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.