QU-16, FX 3 and 4

Forums Forums Qu Forums Qu general discussions QU-16, FX 3 and 4

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of JD4 JD4 5 years, 11 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #70490
    Profile photo of JD4
    JD4
    Participant

    I’m sure I’m wrong … hope so … but seems FX 3 and FX 4 are really useless on the mixer. I can add external FX using a loop, say Mix-Out >> External Rack Unit >> ST1 Return …

    OR … ???

    #70492
    Profile photo of Mike Storm
    Mike Storm
    Participant

    You can use any spare Mix to feed FX 3 and 4. Or a Direct Out if the FX is only used for a channel.
    You can also insert them on any input or output channel.

    #70494
    Profile photo of Roy
    Roy
    Participant

    What Mike said. Any of the mixes can be used for FX 3 and 4. I tend to use 5-6, 7-8 or 9-10 as some of the FX are better suited to a stereo mix.

    #70495
    Profile photo of Mike C
    Mike C
    Participant

    I assume you have a QU16.
    To patch any of the FX processors IO routing go to the “back panel” tab on the FX
    processor menu there you can select an unused mix to become the FX mix for FX3 and FX4.

    #70497
    Profile photo of JD4
    JD4
    Participant

    THANKS .. lemme try it

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.