QU-16 APFL/PFL Routing to alt out (Studio Monitor)

Forums › Forums › Qu Forums › Qu general discussions › QU-16 APFL/PFL Routing to alt out (Studio Monitor)

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 8 years, 9 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2015/07/24 at 4:42 pm #49464
    Profile photo of michal7
    michal7
    Participant

    Hi there,
    I`m new here and not abble to hear apfl/pfl on my studio Monitors.
    can somebody help ?
    I use this hear a cut during voice over recording to our Video editor.

    2015/07/24 at 5:17 pm #49465
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    What’s routed to the output, and what is the setting on the physical controller?

    2015/07/26 at 10:32 am #49491
    Profile photo of michal7
    michal7
    Participant

    Hello,

    to the main output is routed LR and to altout to.
    i can hear pfl with Headphones Only not on altout.
    the settings from pafl are :
    Additive: off
    LR to PAFL :on
    input afl : on ((prefade)
    Set follow pafl : on
    Set follow mix : on

    Thank you for your help
    best regards

    2015/07/26 at 12:12 pm #49493
    Profile photo of GCumbee
    GCumbee
    Participant

    Set Alt out to PAFL.

    2015/07/28 at 10:22 am #49563
    Profile photo of michal7
    michal7
    Participant

    I would like set alt to PAFL, but our Qu-16 miss the setting (latest Firmware)

    Attachments:
    You must be logged in to view attached files.
    2015/07/28 at 11:02 am #49567
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Scroll down (touch the list and twiddle the screen rotary)

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.