QU-16 and ME-1 routing

Forums › Forums › Qu Forums › Qu general discussions › QU-16 and ME-1 routing

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of GCumbee GCumbee 10 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2013/11/15 at 9:25 pm #36074
    Profile photo of GCumbee
    GCumbee
    Participant

    I figured out how to get the QU to work on the ME-1 as a 1-16 in that mode on the ME. But there is no monitor mode on the QU to assign sources the ME-1. So, if I wanted to route an FX to the ME how can that work? I have looked all over and tried several things but have yet to figure out a way to do that. Many times a singer will want so verb to mix in. I can figure out how to do it on a Mix buss but not to the ME.

    2013/11/16 at 4:22 am #36076
    Profile photo of GCumbee
    GCumbee
    Participant

    Think I figured this one out finally. There is more info on the website manual than the one than comes in the box. I finally saw that the QU’s channels, FX, etc are mapped to the ME. Also with a 2412 connected you are supposed to have a MONITOR screen. I have a 2412 for my GLD’s just have not tried that yet…

    FX mutes on softkeys like the GLD would be nice to kill verb quickly…….

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.