Q-Level for GEQ

Forums Forums GLD Forums GLD general discussions Q-Level for GEQ

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of cornelius78 cornelius78 6 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #39974
    Profile photo of GSLC-Tech
    GSLC-Tech
    Participant

    GLD-112. Is there a q-level for the GEQ? I’m not finding it documented, which may mean it’s a stupid question. Just doing some feedback removal for choir mics and want to know how much I’m loosing.

    #39975
    Profile photo of cornelius78
    cornelius78
    Participant

    IIRC the (default: constant Q) GEQ is 1/3 octave per band. The PEQ can do 1/9th of an octave, which might be better for notching feedback. There are multiple types of GEQ selectable though, including the “Proportional Q,” which narrows the Q (beyond 1/3 octave) the more severe the boost/cut. Both PEQ and GEQ can operate on the same bus simultaneously. Select a bus, go into the processing screen and the GEQ tab, and press the “?” on the touch screen to read about the different types of GEQ. This also works in Editor if your not in front of the GLD ATM.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.