Q-drive record levels

Forums › Forums › Qu Forums › Qu troubleshooting › Q-drive record levels

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 8 years, 9 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2015/07/25 at 8:54 pm #49480
    Profile photo of Rich
    Rich
    Participant

    I having a lot of trouble getting adequate volume from my q-drive recordings
    I have set my q-drive to record Mix-10 which I’m not using, and running the channel fader and the Mix 10 main all the way up to get any kind of record volume
    I have this issue on a QU-16 and a QU-32

    2015/07/26 at 12:30 am #49482
    Profile photo of mervaka
    mervaka
    Participant

    0dB on the meters results in a -18dBFS level in your recording. This is intentional, and thoroughly discussed in another thread

    2015/07/26 at 2:09 am #49484
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Look at the manual under “Channel Routing Screen”.

    2015/07/26 at 7:54 am #49489
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Read the other thread.

    But basically ‘adequate’ volume is probably not what you think it is.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.