Problem with USB redording

Forums Forums dLive Forums dLive troubleshooting Problem with USB redording

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of MVickery MVickery 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #81538
    Profile photo of Schmiddi
    Schmiddi
    Participant

    Need some help. Recorded a show on a USB Stick through Stereo Matrix. Signal was there, Stick was formated some time ago on the console and everything worked well. When I stopped the record and started to play the file on my laptop it said the filestructure is not okay. opened the file on logic an there was an audio track but there was no waveform in it. so the file is about 400mb of size but no waveform. The stick worked a lot of times before and I can still read an write on it so its not broken.
    The file was created on an older firmware version, so maybe this could be a problem? Another thing what I thought about was the sync of DLive. It gets the sync from a dante card in 48 KHz. Recording told this will be on 96 KHz. the console is doing samplerate conversion for this, right?

    Would be awesome to get some help or advise.

    Thanks

    #81553
    Profile photo of MVickery
    MVickery
    Participant
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.