Problem with DAW-Control 1.71

Forums Forums SQ Forums SQ troubleshooting Problem with DAW-Control 1.71

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of Tom Metz Tom Metz 2 years, 11 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #101043
    Profile photo of Tom Metz
    Tom Metz
    Participant

    I still use the DAW-Control 1.71 (no obvious reasons to switch to AH midi control), in CC translator mode to remotely mix on my SQ5 (i.e. moving faders and muting channels).
    In my DAW, Ableton 10, I use MIDI Cntr messages to automate the mixing. To move the fader controlling lp2, I have to use MIDI Cntr message 1 (modulation), and Cntr message 2 (Breath) to move the fader controlling lp3 etc.. This works well except for the fader controlling lp1. The fader doesn’t react using channel pressure or pitch bend (obviously). What is going wrong here? Or stated otherwise how can I control lp1 remotely using the CC translator mode?

    Cheers Tom Metz

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.