Problem with Channel 1 on Qu-32

Forums › Forums › Qu Forums › Qu general discussions › Problem with Channel 1 on Qu-32

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 8 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2016/04/18 at 3:44 am #55137
    Profile photo of PHBC
    PHBC
    Participant

    I have the Qu-32. I have my computer on Channel 1. All of my channels are set up to be Pre Fader (Mains and monitors controlled separately). But for some reason I can’t get Channel 1 to be Pre Fader. I’ve tried pushing Assign + Sel button and nothing happens. Everytime I turn up the Fader for the mains, the monitors get louder also on this Channel only. Am I doing something wrong?

    2016/04/18 at 6:57 am #55140
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    When you say all the channels are pre fader…

    Each channel has a pre/post selection for each mix, possibly easiest to see on the routing screens?

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.