Problem AR2412 (Purple) and AB168

Forums › Forums › GLD Forums › GLD troubleshooting › Problem AR2412 (Purple) and AB168

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of Rorikx Rorikx 8 years, 4 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2015/12/20 at 11:34 am #52848
    Profile photo of Rorikx
    Rorikx
    Participant

    Hi

    I have GLD80 with 1.51 version and always work fine with AR2412 (Purple) i recently buy a AB168 to connect with expander port in the AR2412.

    I using cable Cat5 to connect GLD80 to AR2412 and Cat5 to connect AR2412 to AB168 but GLD don’t detect the AB168 connected, the light in AR2412 expander connection is flashing but in the AB168 don’t flashing and don’t on the ready light.

    If i connect the GLD directly with AB168 al its right but the firmware don’t update in AB168.

    If i connect the GLD-AR2412-AB168 GLD don’t work fine.

    Thanks for your help.

    Attachments:
    You must be logged in to view attached files.
    2015/12/20 at 12:04 pm #52850
    Profile photo of Rorikx
    Rorikx
    Participant

    This is my config, don’t run.

    Attachments:
    You must be logged in to view attached files.
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.