Pro tools daw control

Forums › Forums › SQ Forums › SQ troubleshooting › Pro tools daw control

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of eythoralex eythoralex 4 years ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • 2020/03/28 at 6:48 pm #90547
    Profile photo of eythoralex
    eythoralex
    Participant

    Hey, so I followed all the instructions for connecting SQ mixer to Pro Tools for DAW control but I am stuck on one step. The only input midi device that I see in pro tools is “SQ – midi in emulated” but using that when setting up HUI controler in pro toold dosn’t work. Everything is as is should be in DAW control driver. Mixer = SQ, MIDI channel = 2, protocol = HUI, Midi ports, Input = SQ midi in, output = SQ midi out. And midi daw channel in the SQ is on channel 2. What could be the problem?

  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.