Presonus iPad Recording App – will this work with QU?

Forums Forums Qu Forums Qu general discussions Presonus iPad Recording App – will this work with QU?

This topic contains 4 replies, has 2 voices, and was last updated by Profile photo of robbocurry robbocurry 9 years, 8 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #40910
    Profile photo of robbocurry
    robbocurry
    Participant

    https://www.presonus.com/products/Capture-for-iPad

    Just saw this while trawling the net and was wondering if anyone knows if this would work with a QU24? It’s only $10.
    I wish the QU drive had the ability to record all channels from my QU24 but currently it doesn’t, no gripes there, it is what it is.
    I know you can use a laptop via the USB B but this would be very handy, iPads are the Kings of handiness;)
    Thoughts anyone?

    #40912
    Profile photo of
    Anonymous

    Good idea.
    I guess this depends on what information is sent via A&H port?
    I’m not a rocket scientist in this area.
    Another idea would be for the QU drive to be able to plug into an iPad to record or even to be used as a display for like RTA / meter bridge or an extension of any other TAB etc..

    #40914
    Profile photo of
    Anonymous

    Hi robbocurry
    After reading the manual… and more reading
    MIDI over TCP Network – The rear panel Network
    port is used for connection to a WiFi router to work
    with an iPad running the Qu-Pad app. The app uses
    these MIDI messages to remotely control the Qu
    mixer. Alternatively, the Network port can be used with
    a touch panel or other remote controller that allows
    configurable MIDI over a TCP/IP port.

    So it uses data…
    Only A&H (or someone who is a rocket scientist) would know what else is transmitted.
    And then of course this raises the question of iPad personal monitors

    #40915
    Profile photo of
    Anonymous

    after reading this
    There are obviously huge complications around recording into an iPad
    after reading this
    https://forums.prosoundweb.com/index.php?topic=141618.0

    #40937
    Profile photo of robbocurry
    robbocurry
    Participant

    Thanks dhak, I knew it was probably too good to be true;)

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.