pregain chanel

Forums Forums SQ Forums SQ feature suggestions pregain chanel

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of nottooloud nottooloud 2 years, 5 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #103899
    Profile photo of rox-ale
    rox-ale
    Participant

    Goodmorning everyone
    it would be interesting to have the possibility of multitrack recording with pregain. That is to have a pregain (pre preamp) in the “direct out source” settings so that during recording if I change the gain of the channel it is not affected.
    What do you think?

    #103900
    Profile photo of Highflyer1953
    Highflyer1953
    Participant

    The signal be analogue before gain stage, as the gain stage is analogue on all A&H preamps. So the would be no way to do that.

    #103901
    Profile photo of rox-ale
    rox-ale
    Participant

    I get it.
    Then it would be useful to have a button that when pressed in multitrack recording is not affected if the gain value is changed.
    Would this be possible? For me it would be very useful

    Alessio

    #103907
    Profile photo of SteffenR
    SteffenR
    Participant

    use trim after the initial setup?

    #104234
    Profile photo of nottooloud
    nottooloud
    Participant

    When I change the gain, it’s because it’s either clipping or too low. In either case, I want the multitrack to follow that change.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.