PRE AMP

This topic contains 6 replies, has 4 voices, and was last updated by Profile photo of volounteer volounteer 1 year, 1 month ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #90406
    Profile photo of rhill
    rhill
    Participant

    this maybe a stupid question,but i am trying to wrap my head around preamp section of channels. Is the PEQ library and the Channel Library an either or? Or can you use both? what what be any advantages or disadvantages of either one. Tried finding some tutorials and just haven’t found anything that explains it in lamens terms to me.

    #90409
    Profile photo of rhill
    rhill
    Participant

    see pic above post. original pic was too large

    #90410
    Profile photo of SteffenR
    SteffenR
    Participant

    it is a stupid question because there were some questions in the same area of interestr in the last two weeks…
    search!

    preamp has nothing to do with PEQ
    read this and stay @home

    https://www.allen-heath.com/media/Qu-Mixer-Reference-Guide-AP9372_10.pdf

    #90411
    Profile photo of SteffenR
    SteffenR
    Participant

    upps it was in the SQ Forum
    but still a search would help

    #90412
    Profile photo of volounteer
    volounteer
    Participant

    @rhill

    see p89 of the document Steffen R noted

    The screen you note allows you to choose either one to make further settings that are related

    And to us mere mortals: they are related because
    they are both in the channel strip of the block diagram
    so it was not a stupid question
    and was just a typical answer here

    #90413
    Profile photo of Mike C
    Mike C
    Participant

    Don’t get too caught up on the presets, at best they would be a staring point. I have never used them but I have made and saved a couple of my own.

    The presets can not take into account a lot of unknown variables like the voice or amp/instrument at the mic, the type of PA and room, stage volume and monitors, ect.

    #90415
    Profile photo of volounteer
    volounteer
    Participant

    +1
    @rhill
    What @mikec said

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.