possibility to link LR out to 5-6/ 7-8/ 9-10 stereo mix on qu-pac

Forums Forums Qu Forums Qu feature suggestions possibility to link LR out to 5-6/ 7-8/ 9-10 stereo mix on qu-pac

This topic contains 4 replies, has 5 voices, and was last updated by Profile photo of Andreas Andreas 8 years, 6 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #50362
    Profile photo of midijay
    midijay
    Participant

    Hi.

    in qu-pac the matrix 1-2 / 3-4/ are routable only to alt-out, aes, and usb.

    but alt-out don’t need this, you can choose in alt-out routing menu’ the source…and you can assign what you want.

    for supply the not present xlr matrix out in qu-.pac, you can add in next firmware the possibility to link LR out to 5-6/ 7-8/ 9-10 stereo mix.

    in this way, we can have the same mix in different mix out but with separate volume,eq…a good alternative for qu pac user.

    thanks in advance.

    #50363
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    It might even be possible to have the outputs be a bit more patch able, but that rather breaks the labelling…

    #50374
    Profile photo of MarkPAman
    MarkPAman
    Participant

    I’d like the local outputs to be patchable too.

    #50382
    Profile photo of mervaka
    mervaka
    Participant

    The labelling issue would really confuse matters, regardless of whether it’s technically possible.

    #50383
    Profile photo of Andreas
    Andreas
    Moderator

    Hmm, the group of “Mix Outputs” are labelled 1..10. Making them assignable isn’t any more confusing than assignable inputs, dSnake ports or QuDrive streams. Just stick a small black tape over the letters “Mix” and everything is fine. 😉

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.