Polarity

Forums › Forums › dLive Forums › dLive General Discussions › Polarity

Tagged: 

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of Wolfgang Wolfgang 6 years, 6 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2017/10/06 at 7:38 pm #65580
    Profile photo of Art
    Art
    Participant

    How do I change the polarity of a Mix? I know that on the Ext In tab, there is a polarity button, but I assuming that only works if I have an external source for the mix.

    Thanks.

    2017/10/07 at 6:39 am #65584
    Profile photo of ddff_lv
    ddff_lv
    Participant

    You can change polarity of output socket in I/O patch window clicking on the socket header (top horizontal).

    ddff

    2017/10/07 at 12:01 pm #65587
    Profile photo of Art
    Art
    Participant

    Thanks. I guess I missed that when I did a search in the manual for the word “polarity”. It was right there, though.

    2017/10/07 at 1:19 pm #65588
    Profile photo of ddff_lv
    ddff_lv
    Participant

    By the way, for digital outs also sample rate is there. Took me a while to figure.

    ddff

    2017/10/07 at 10:30 pm #65593
    Profile photo of Wolfgang
    Wolfgang
    Participant

    but that’s been around since the beginning. 😉

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.