pink noise QU-PAC

Forums Forums Qu Forums Qu general discussions pink noise QU-PAC

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Steven18 Steven18 9 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #104326
    Profile photo of Steven18
    Steven18
    Participant

    hello everyone, could someone explain to me how to calibrate the facade with pink noise with my QU-PAC, I have a microphone dedicated to this function but I do not know how to do it (or where to connect it? is there a dedicated entry?), thank you for your help, best regards

    #104328
    Profile photo of Scott
    Scott
    Participant

    Connect it on any input channel, then PAFL that channel and look at the RTA.

    #104330
    Profile photo of Mike C
    Mike C
    Participant

    As Scott mentioned any input or output that is PAFL’d it’s signal is then routed to the RTA and don’t forget the spectrograph display.

    Make sure you don’t have multiple channels or outputs PAFL’d.

    #104334
    Profile photo of Steven18
    Steven18
    Participant

    thanks guys it’s great i will watch this, thanks for your help

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.