Per-channel Direct Out Settings

Forums › Forums › SQ Forums › SQ feature suggestions › Per-channel Direct Out Settings

Tagged: 

This topic contains 4 replies, has 2 voices, and was last updated by Profile photo of SteffenR SteffenR 3 years, 1 month ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2021/02/23 at 9:28 pm #99181
    Profile photo of howlingwolf487
    howlingwolf487
    Participant

    Not sure if it’s doable, but I would like to see the Direct Out settings be configurable per-channel vs only globally.

    2021/02/24 at 1:49 am #99192
    Profile photo of SteffenR
    SteffenR
    Participant

    If you do this, your audio will be out of sync…
    we already discussed this earlier

    2021/02/24 at 2:11 am #99196
    Profile photo of howlingwolf487
    howlingwolf487
    Participant

    Steffen,

    I did search for similar posts, but the search function on this website is rather abysmal, IMO.

    That said, could you link me to the aforementioned post?

    Thanks.

    2021/02/24 at 2:17 am #99197
    Profile photo of howlingwolf487
    howlingwolf487
    Participant

    Also, I can definitely accept a global pick point for the Direct Out audio signal.

    I would like to see per-channel settings for the “follows” ([Channel] Mute, [Channel] Fader, DCA Fader, DCA Mute and Mute Group).

    2021/02/24 at 2:17 am #99198
    Profile photo of SteffenR
    SteffenR
    Participant

    That said, could you link me to the aforementioned post?

    I have the same search function… and yes it’s not ideal…

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.